How To Clean Pool Main Drain

A clogged swimming pool main drain poses a threat to the pool pump and distorts the water's proper circulation. The debris causing the clog is downright difficult to remove, and it can cause permanent harm to the pump. Getting a clog buster will save you from spending a significant amount of money to call a plumber.

Clogging of multiple fixtures and improper water circulations are possible symptoms of the pool main drain not workingproperly. The best action to take is to get a clog buster to facilitate the process of unclogging the filter to ward off serious damage to the pipes leading to the pump.

As a pool owner,do you need a main drain in a swimming pool? Yes is the answer to this worthwhile question; it works together with the skimmer to help filter your pool water. If you have them, both main drains are located at the deepest section of the pool, about 3-ft apart.

How to Unclog Pool Main Drain?

Your pool's main drain needs regular cleaning. However, all other pool components, like the filter, may be working properly, but the main drain is at high risk of clogging. The main drain is located at the bottom center of the pool, and drowning debris can make the swimming pool main drain clogged. To unclog your pool main drain, follow these steps:

To ensure clogging doesn't occur in the first place, routinely eliminate particles and debris from the highest point of the pool with the skimmer. By removing the hovering trash on the pool, you block it from stumbling to the basement.
Remove the pool channel fittings and let them siphon. This is the most straightforward approach to clear out the channel.
Detach the channel lid and put the plunger on the drain. Push the plunger down, and then raise it. Redo the process repeatedly till the clog is forced up and out of the channel.
Pour the natural swimming pool cleaner into the channel. This will help separate any particles and trash stuck in the channel that has not been eliminated with the plunger.
Put the drain lid back on the channel and top of the pool.

How to Clean Main Drain

If you're facing a serious clogging problem with your pool main drain, don't be tired. Clogged pool main drain often occurs due to the heavy accumulation of debris sinking to the bottom of your pool. It is a simple task that you can do yourself with few tools. Follow the below-listed steps to clear-out your pool main drain:

Connect the hose to a faucet and insert the pipe into the sewer and let it go as far as it can reach
Affix a rag around the hosepipe opening and opens the water with the optimum force for some time.
Take a pressure washer and connect a high-performance sewer pipe to it.
Now put the hose closer to the clear-out channel and switch on the high-pressure washer.
Continue inserting the pipe into the clear-out channel till you put 3-4ft of the hosepipe in place.
Once you hear the pipe drain, pull the pipe in half to prevent the sewer from splashing water out of the cleaning pipe.
Release the pressure washer trigger and remove it slowly from the cleaning line.
Remove the drain hose from the pressure washer.
Drain and clean the drain hose following the manufacturer's provided instructions.
Change the plug on the clear-out channel and tighten it with a wrench until it is completely closed.

Reader Interactions